TVLogic LUM-310X

The TV Logic LUM-310X is a 4K HDR Reference Master production monitor with a 31-inch Dual Cell LCD designed to reproduce reference HDR content at a maximum luminance of 1,000 nits with a simultaneous deep black minimum of 0.001 nit.

This makes possible a simultaneous contrast ratio nearing 1 million to 1. The LUM-310X supports various HDR standards and multiple colour gamuts including Rec.709, DCI, and Rec.2020.

Lum-310X Features:

1:1 Pixel Mapping Modes for SD/HD
Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Blue Only / Mono
Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the colour tones (tones and saturation) of the screen using the SMPTE Colour Bar. For example, after displaying the Blue channel, adjust the Colour (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

Closed caption

H/V Delay
Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

Marker
Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

User Aspect
Adjusts the Width /Height display ratio.

Various Scan Modes
Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Waveform/Vector Scope
Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the colour components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

For more information on the TVLogic LUM-310X click here.

Display Spec
Size	31.1″
Resolution	4096 X 2160 (17:9)
Pixel Pitch	0.1704mm
Colour Depth	1.07B
Viewing Angle	178°(H) / 178°(V)
Luminance	1,0cd/m2
Contrast Ratio	1,000,000:1
Display Area	698(H) x 368(V) mm

Input

4 X BNC 12G-SDI A/B Channel Input, 3G-SDI C/D Channel Input
1 X HDMI HDMI Input

Output

4 X BNC HD SDI A/B/C/D Channel Output

Input Signal

3G SDI 2.970Gbps
12G SDI 11.880Gbps
HD SDI 1.485Gbps
SD SDI 270Mb/s
HDMI 480i/480p/576i/576p/720p/1080i/1080p/2160p

SDI Input Signal Formats

SMPTE 425M-A/B 1080p (60/59.94/50/30/29.97/25/24/23.98/30sF/ 29.97sF/25sF/24sF/23.98sF) / 1080i (60/59.94/54)
SMPTE 296 720p (60/59.94/54)
SMPTE 274 1080i (60 / 59.94 / 50) 1080p (30/29.97/25/24/24sF/23.98/23.102sF)
SMPTE 260 47.95/48/50/59.94/60p)

Audio

Audio In Embedded Audio/Analog Stereo (Phone Jack)
Audio Out Analog Stereo (Phone Jack), Internal Speaker(Mono)

FPGA Functions

1:1 Pixel Mapping Modes for SD/HD, 3G-SDI Level A/B, Audio Level Meter Display, Blue Only, Focus Assist, H/V Delay, Key Lock, Luma(Y’) Zone Check, Marker, Max Brightness On/Off, Mono, Time Code Display, UMD, User Aspect, Various Scan Modes, Waveform/Vector, SingleMode
Closed Caption
CC-608 ANC, CC-608 LINE 21, CC-708