The TV Logic 074W (LVM-074W) features a high-resolution (1024×600) 7” LED backlit LCD panel housed in lightweight (600 grams) yet durable magnesium alloy case.

An ideal monitor for the latest compact cinema cameras, the LVM-074W offers a wide range of professional features including: Waveform/Vectorscope, built-in HDMI to HD-SDI conversion output, Horizontal and Vertical Image Flip, Focus Assist, Audio Level Meter and more.

A feature unique to the TV Logic 074W is TVLogic’s new user selectable Temperature Adaptive Color function that measures LCD panel temperature and automatically compensate the white balance drift caused by a cold or hot weather.

• 3G-SDI Level A/B

  Supports 3G-SDI Level A/B input.

• Audio Level Meter Display

  Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

• Blue Only / Mono

  Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

• Closed caption

• Focus Assist

  Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.

• H/V Delay

  Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

• H/V Flip

  Allows the displayed image to be flipped horizontally or vertically. This feature provides flexible mounting options for camera operators.

• Luma(Y’) Zone Check

  Displays the Luma(Y’) level of the input image in colors. Each pixel’s Y’ analyzed and changed to a certain color or zebra pattern according to the Index on the right side of the screen.

• Marker

  Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

• Max Brightness On/Off

  Displays the brightness increases from the normal up to max brightness to obtain a sharp and bright image when shooting outdoors.

• Range Error

  Analyzes the input signal’s Luma (Y’) and chroma (C’) information. If the input signal exceeds the designated minimum and maximum values, the pixel will blink. This function allows for the user to easily identify any issues with exposure.

• Time Code Display

  Displays the Timecode information on the screen.

• User Aspect

  Adjusts the Width /Height display ratio.

• Various Scan Modes

  Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

• Waveform/Vector Scope

  Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
  Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

• Zoom

  Magnifies the input signal from 0% to 90%.