The Flowcine Serene Arm is a patent pending two axis spring arm that attaches at the end of the Easyrig Vario arm.
The Easyrig Vario 5 is a versatile, all-round solution no matter what setup you have. One adjustable Easyrig to fit your needs.
Adjustable weight range
By adjusting the tension with the provided allen key, the Easyrig Vario 5 can be tuned to match your exact camera setup ranging from 5-17 kg (11-38 lbs).
The Serene Arm stabilises vibrations and motion errors on the vertical axis that comes from walking or running with the rig. It also stabilises side to side errors in the same scenarios by counter pivoting around it’s center axis. At the same time you have full use of the Easyrig cord extension that will allow you to go from high to low mode while at the same time the Serene Arm will take care of the vertical and side to side stabilisation adding two more stabilised axis to your existing system.
Fits all cameras
The Easyrig Vario 5 can be attached to any camera as long as it has a camera handle due to our easy-to-use camera hook.
The Serene Arm can take camera setups between 6-19.5 kg, and you can easily fine tune the spring tension without tool. Of course it works great with the Gravity One, but it also works really well for other gimbal rigs like the Freefly MoVI, DJI Ronin, Letus Helix and most other leading gimbal rigs.
Standard setup includes:
- Support bar
- 1x Flowcine Serene Arm
- Camera hook
- Vest with breathable material
- Power pack
- Adjustable vest stabilizer
- Mounts on any Easyrig arm in the 2/2.5/3 and Vario4/5 series. (For rigs over 16 kg we recommend the Easyrig Standard upper arm and not the Medium +130mm or Long +230mm versions.)
- Serene arm allows for a frictionless boom range of 180mm.
- Easyrig cord passes through the Serene, enabling high/low mode shooting.
- Two springs cover the payload range of 6-19.5kg.
- Totally reactive at both slow and fast walking/running sequences with push/pull forces of 800g to 1200 g depending on the camera load and gimbal total weight.
- Allows for further accessories like the Serene Extension arm.
Call us on 0141 4202053 to discuss your job or use the contact page to email us.
