Video, Digital (bi-directional)
-Interface: SMPTE ST 259, SMPTE ST 292
-Data rate: 270 Mb/s or 1.5 Gb/s
-Input level: 800 mV p-p
-I/O impedance: 75Ω
-Output impedance: 75Ω
-Bit-error rate at -22 dBm: 10-12
-Jitter (pathological data): <0.2 UI
-Rise/fall times: <270 ps

Video, Analog (bi-directional)
-Interface: RS-170, NTSC, PAL
-Frequency response: 30 Hz – 4.2 MHz: ±0.25 dB
-8 MHz: -3 dB
-Video signal to noise ratio: ≥70 dB
-Differential gain: <2%
-Differential phase: <2°

Ethernet
-Data support: 10BaseT/100BaseT
-Connector: Twisted pair RJ45
-Cable compatible: UTP 100Ω Cat5
-I/O impedance: 10 kΩ / 30Ω

Audio
-Number of channels: 1 to 4
-Type: Balanced, line level
-Impedance: >15 kΩ
-Maximum input level: 24 dBu
-Quantization: 24 bits, 128X (oversampled)
-Sample rate: 48 kS/s
-Frequency response: ±0.1 dB, 20 Hz to 20 kHz

Intercom
-Number or channels: 2
-Interface types (base): RTS, Clear-Com or 4-Wire
-Frequency response: 200-18 kHz, ±3dB
-Max distortion: ≤0.5 %
-Noise: <-60 dBu
-Max gain (RTS or Clear-Com): ≥24 dB
-Min gain (RTS or Clear-Com): ≤-45 dB

Electro-Optical
-Operating wavelengths: 1310/1550 nm
-Tx laser output power (std./opt): -6/0 dBm
-Rx sensitivity, HD-SDI: -22 dBm
-Fiber compatibility: Single-mode
-Optical connector options – camera unit:
*Local power: MX or opticalCON
*Remote power: Short range power, SMPTE ST 304 or opticalCON
*Long range power, SMPTE ST 304
-Optical connector options – base station:
*Unpowered (TAC Cable): ST or opticalCON
*Remote power (hybrid fiber): Standard power: SMPTE ST 304, opticalCON, or STs and Molex

Distance Limit*
-TAC Cable (local power at camera):
*Standard laser: 15 dB optical loss ( ≥5 km*)
*Optional DFB laser: 19 dB optical loss (~30 km*)
-SMPTE ST 311 hybrid fiber:
*Standard internal power supply w/PowerWafer: ~ 300m (984 ft.), 95W at 12 VDC*
*Long range: HDX w/PowerPlus, LP: ~2 km (6,562 ft.): 100W cont. / 150W peak*

Mechanical/Environmental
-Dimensions (W x H x D):
*Camera unit: 63.5 x 55.9 x 165.1 mm (2.5 x 2.2 x 6.5 in.)
*Base station: 444.5 x 44.5 x 228.6 mm (17.5 x 1.75 x 9 in.)
*PowerWafer: 127 x 55.9 x 155.5 mm (5 x 2.2 x 6.12 in.)
*PowerPlus LP (100W): 127 x 63.5 x 152.4 mm (5 x 2.5 x 6 in.)
*PowerPlus HP (150W): 127 x 94 x 152.4 mm(5 x 3.7 x 6 in.)
*HDX: 330.2 x 215.9 x 88.9 mm (13 x 8.5 x 3.5 in.)

Weight:
-Camera unit: 0.68 kg (1.5 lbs.)
-Base station: 2.27 kg (5 lbs.)
-PowerWafer: 0.68 kg (1.5 lbs.)
-PowerPlus: LP: 1.04 kg (2.3 lbs.), HP: 1.13 kg (2.5 lbs.)
-HDX: 4.76 kg (10.5 lbs.)

Power consumption:
-Camera unit: 8W at 10-18 VDC
-Base station (TAC Cable): 10W at 10-18 VDC

Temperature range: -25° to 45° C

Humidity range: 0 to 95% RH, non-condensing

*The maximum cable length varies due to optical loss that can depend on cable quality, dirt/dust/contamination on connectors, and number of fiber interconnects. When using hybrid cable for power, the size of the hybrid cable, as well as the power draw of the camera, lens and accessories are also factors.